| Frequency Range (-10dB) |
70 Hz – 20 kHz |
| Frequency Response (±3dB) |
105 Hz – 20 kHz |
| Power Rating (8Ω setting) |
160 W continuous program (2 hrs)
80 W (320 W peak) continuous pink noise (2 hrs)
60 W (240 W peak) continuous pink noise (100 hrs) |
| Sensitivity (2.83V @ 1m) |
86 dB |
| Coverage Pattern |
Vertical 110° (1 kHz–4 kHz average); 10° down-tilt to aiming access for +45°/-65° coverage relative to physical cabinet aim
Horizontal 160° (1 kHz–4 kHz average) |
| Directivity (Q) |
7.8 |
| Directivity Index (DI) |
8.9 dB |
| Rated Maximum SPL |
105 dB continuous (111 dB peak) @ 1m |
| Nominal Impedance |
8Ω (in thru/direct mode) |
| Minimum Impedance |
7.0 Ω @ 275 Hz |
| Transformer Taps |
20 W, 10 W, 5 W @ both 70V & 100V (plus 2.5 W @ 70V), and 8Ω thru, selectable via switch |
| Transformer Insertion Loss |
Less than 1 dB for all taps |
| Maximum Input Voltage |
21 V RMS (2 hrs), 42 V peak |
| Recommended Protective High-Pass |
70 Hz for 8Ω operation; 60 Hz for all transformer tap settings (20W, 10W, 5W, 2.5W) |
| Drivers |
Two 125 x 55 mm (5 x 2.25 in) racetrack LF drivers
One 25 mm (1 in) tweeter (located at top of array for better coverage of listening space) |
| Enclosure Material |
PC + ABS, UL94-V0 flammability rating |
| Grille |
Plated SPCC with polyester powder coat finish |
| Agency Ratings |
Transformer UL recognized. RoHS, REACH compliance. LVD for CE. |
| Environmental Rating |
IP-54 rated per IEC60529, dust and water protected when installed with included rain cover for input terminal compartment and no physical up-tilt cabinet aiming. UV resistant (Cycle 1 per ISO 4892.3-2006). |
| Terminals |
4-pin Euroblock connection for bare wire, accepts 24 to 14 AWG gauge wire (0.25 to 2.5 sq mm). Rain cover allows for one or two 2-wire cables, max cable jacket diameter 8 mm (0.3 in). |
| Insert Points |
Back panel: 2 threaded insert points for wall bracket (M6 x 20 mm bolts included), plus 1 threaded insert point for secondary safety cable (M6 x 20 mm deep)
Top & bottom caps: 1 threaded insert point on each (2 total) for L-brackets (M6 x 28 mm bolts included; installer-only attachment insert is M6 x 28 mm deep)
Side panels: 1 threaded insert point on each side (2 total) for L-brackets (M6 x 28 mm bolts included; installer-only attachment insert is M6 x 22 mm deep) |
| Mounting |
Included swivel (pan)/tilt wall bracket: ±95° horizontal swivel (at 0° down-tilt), +0°/-10° vertical tilt
Two included L-brackets, positionable on top/bottom or side/side insert points
Top, bottom, and side threaded insert points available for installer-supplied mounting methods (installer responsible for mounting safety) |
| Dimensions (H x W x D) |
598 x 102 x 93 mm (23.6 x 4.1 x 3.7 in) |
| Net Weight |
3.5 kg (7.8 lb) each |
| Shipping Weight |
4.5 kg (10.0 lb) each (packed 1 speaker per carton) |
| Included Accessories |
Low-profile swivel (pan)/tilt wall bracket; 2 x L-brackets (positionable on top/bottom or side/side insert points) |
| SKU Numbers and Colors |
JBL-COL600-BK (black, RAL9004), JBL-COL600-WH (white, RAL9016) |
