- Components: Six (6) 165 mm (6.5 in) high-excursion LF drivers (CBT1000E)
- 1500 Watt power handling (CBT1000E)
- Built-in purpose-designed crossover network, for combining with CBT1000 (CBT1000E)
- Coupler plate included (CBT1000E)
- Extended pattern control
- Components: Twenty-four (24) 25 mm (1 in) extra-high-power soft dome tweeters and Twelve (12) 165 mm (6.5 in) high-excursion LF drivers (CBT1000+1000E)
- 3000 watt power handling (CBT1000+1000E)
- Patent-pending Constant Beamwidth Technology ™ provides constant directivity up to the highest frequencies and reduces out-of-coverage lobing.
- Vertical pattern coverage is individually adjustable through a range of four (4) “Pattern Up” angles and four (4) “Pattern Down” coverage angles for a total of sixteen (16) different coverage combinations, all without the use of external DSP processing (CBT1000)
- Patent-pending Tapered Horizontal Waveguide provides a continuously varying horizontal dispersion (very wide for short-throw, narrower for long-throw) delivering superior coverage in both the front and rear corners of a room (CBT1000)
- Single-speaker system room coverage at high SPL, with little over-splash and strong bass response down to below 38 Hz (CBT1000+1000E)
- Switchable voicing provides flat response in music mode or mid-range presence peak in speech mode (CBT1000)
- Swivel (pan)/tilt wall bracket and coupler plate included.
Description
Features
| Specification | Details |
|---|---|
| Drivers (Combined CBT 1000+1000E Array) | Twenty-four (24) 25 mm (1 in) extra-high-power soft dome tweeters and twelve (12) 165 mm (6.5 in) high-excursion LF drivers |
| Frequency Range (-10dB) | 38 Hz – 20 kHz |
| Coverage | Vertical (selectable via switch) |
| Sensitivity | 102 dB (at highest sensitivity setting: "Point" pattern up, "Point" pattern down, "Speech" voicing, in free space) 95 dB (at lowest sensitivity setting: "Medium" pattern up, "Downfill" pattern down, "Music" voicing, in free space) |
| Impedance | 4 ohms |
| Power Capacity | 1500 W (6000 W peak), 2 hrs 900 W (3600 W peak), 100 hrs |
| Maximum SPL (1m) | Highest directivity ("Point"/"Point"), Speech voicing: 131 dB cont avg pink noise, 134 dB cont program, 137 dB peak Highest directivity ("Point"/"Point"), Music voicing: 127 dB cont avg pink noise, 130 dB cont program, 133 dB peak Lowest directivity ("Medium"/"Downfill"), Speech voicing: 128 dB cont avg pink noise, 131 dB cont program, 134 dB peak Lowest directivity ("Medium"/"Downfill"), Music voicing: 124 dB (additional figures not specified in source) |
| Coverage Angle | Vertical: separate four top and four bottom selections. Horizontal: tapered 100° to 160°. |
| Low Frequency Drivers | 12 pcs, 165 mm (6.5 in), neodymium, 50 mm (2 in) voice coil, damped blended textile surround, coated diaphragm for moisture/UV/salt resistance |
| High Frequency Drivers | 24 pcs, 25 mm (1 in), neodymium, encased magnet and coated diaphragm for moisture/UV/salt resistance |
| Enclosure | Fiberglass reinforced ABS cabinet, powder coated 1050 aluminum grille |
| Outdoor Capability | IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. Exceeds Mil Spec 810 for humidity, temperature & UV; ASTM G85 for acid-air/salt-spray (200 hrs). |
| Color | Black (RAL9004) or white (-WH) (RAL9016) |
| Insert Points | Coupler plate utilizes the bottom two rows of the top speaker and the top two rows of the bottom speaker, leaving available: 20 individual M8 inserts on back panel (20 mm deep) for swivel (pan)/tilt bracket(s), plus 4 M8 inserts on top and 4 on bottom of cabinet end-caps |
| Mounting | Included two-part swivel (pan)/tilt wall bracket provides continuously variable ±45° left-right swivel aiming (at no up/down tilt), continuously variable ±5.25° tilt in increments of 5.25°, 5.0°, 4.5°, 4°, 3.75°, 3.5°, 3.0°, 2.75°, 2.5°, 2.0°, 1.75°, and 1.25°. Twenty threaded mounting points on back panel conform to industry-standard rectangular 127 x 70 mm (5.0 x 2.75 in) pattern for legacy OmniMount® and other compatible third-party brackets. Four threaded mount points on top end-cap and four on bottom end-cap. Threaded mounting points can also be used for suspension (always use multiple mounting points). |
| Dimensions (H x W x D) | 2040 x 250 x 345 mm (80.4 x 9.9 x 13.6 in) |
| Net Weight (cabinet) | 47.2 kg (104 lb) |
| Included Accessories | Two-piece swivel (pan)/tilt wall bracket, coupler plate |
| Optional Accessories | MTC-PC2 terminal panel cover CBT1K-ACC1 accessory kit, includes: 2 pcs MTC-CBT-FM3 flush-mount brackets; 1 pc MTC-CBT-OS3 offset bracket (for CBT 1000+1000E array — works with CBT 1000E's included coupler plate to locate the extension cabinet above CBT 1000 instead of below it); MTC-CBT-SUS3 CBT series suspension bracket kit (2 pcs, providing top and bottom attachment points) |