| Drivers |
Thirty-two 50 mm (2 in) full-range drivers |
| Frequency Range (-10dB) |
80 Hz – 20 kHz |
| Frequency Response (±3dB) |
130 Hz – 18 kHz (narrow coverage, music mode setting) |
| Coverage Angle |
Consists of two enclosures. Vertical: Switchable — Narrow Mode: 15°, Broad Mode: 30°, Asymmetrical Progressive-Gradient Mode: 22°. Consult spec sheet for details. |
| Sensitivity — Narrow |
(Speech mode) 95 dB (2 kHz – 5 kHz)
(Music mode) 92 dB (150 Hz – 18 kHz) |
| Sensitivity — Broad |
(Speech mode) 93 dB (2 kHz – 5 kHz)
(Music mode) 90 dB (150 Hz – 18 kHz) |
| Sensitivity — Asymmetrical Progressive-Gradient (on-axis) |
(Speech mode) 94 dB (2 kHz – 5 kHz)
(Music mode) 91 dB (150 Hz – 18 kHz) |
| Impedance |
8Ω per half (top and bottom) for 4 ohms total (in thru mode). Min-Z for system = 2.9Ω. |
| Hookup |
Ensure identical polarity of hookup — for proper functioning, the two loudspeaker modules (top and bottom) must be hooked up in same polarity. Parallel hookup at the two sets of back panel input terminals is recommended. |
| Power Rating |
650 W (2600 W peak), 2 hrs
400 W (1600 W peak), 100 hrs |
| Max SPL — Narrow |
(Speech mode) 123 dB cont avg (129 dB peak)
(Music mode) 120 dB cont avg (126 dB peak) |
| Max SPL — Broad |
(Speech mode) 121 dB cont avg (127 dB peak)
(Music mode) 118 dB cont avg (124 dB peak) |
| Max SPL — Asymmetrical Progressive-Gradient (on-axis) |
(Speech mode) 122 dB cont avg (128 dB peak)
(Music mode) 119 dB cont avg (125 dB peak) |
| 70V/100V Transformer Type |
Set individually per speaker module (top and bottom): 120W, 60W, 30W (15W at 70V only), and direct 8Ω, via switch. Total (with top & bottom set to same): 240W, 120W, 60W (30W at 70V only) and direct 4Ω. Max insertion loss less than 1 dB at any tap. |
| Enclosure |
Fiberglass reinforced ABS cabinet, painted aluminum grille |
| Connectors |
Two (one for top half and one for bottom half), screw-down terminal strip, zinc-plated copper base, nickel-plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8, or #10 lug), or bare wire (up to 12 AWG/2.5 mm²). |
| Outdoor Capability |
IP-55 rated, per IEC529, when installed with optional MTC-PC2 panel cover. UV, moisture, and 200-hr ASTM G85 acid-air/salt-spray resistant. |
| Color |
Black or white (-WH) |
| Configuration |
Two pieces (top and bottom half), each 100 cm tall, connected together via coupler plate. Top/bottom orientation of each piece must be observed. |
| Insert Points |
28 M6 insert points on back panel (36 total with 8 center points utilized by the coupler plate) |
| Mounting |
Included swivel (pan)/tilt wall bracket (must be mounted to threaded points on coupler plate) provides continuously variable ±80° left-right swivel aiming (at up to ±5° up/down tilt), continuously adjustable ±10° up/down tilt, plus 5° fixed increment tilt angles to ±10°. Twenty-eight available threaded mounting points (M6 diameter x M1 thread pitch x 17 mm deep) on back panel. Threaded mounting points can also be used for suspension. Compatible with OmniMount 30.0 brackets. |
| Dimensions (H x W x D) |
2000 x 98.5 x 153 mm (78.8 x 3.8 x 6.0 in) |
| Net Weight |
14.6 kg (33 lb) |
| Included Accessories |
Swivel (pan)/tilt wall bracket, coupler plate |
| Optional Accessories |
MTC-PC2 terminal panel cover
MTC-CBT-FM1 flush-mount low-profile wall-mount bracket (2 pieces required)
MTC-CBT-SMB1 stand-mount bracket for use with 35 mm speaker stands (heavy duty stand required) |
